Burbank grew fast after World War II, and a big share of its homes went up in the 1940s and 1950s with cast iron drain lines that are now well past middle age. In neighborhoods like Magnolia Park, those pipes run under slab floors and finished additions. Restoring them from the inside lets a Burbank homeowner fix a cracked or rusted line without opening up the floor.
The idea is simple. A clean pipe gets a new inner surface. Once the epoxy cures, it seals small cracks and joints and protects the old metal from more corrosion.
Our 4-step process
Inspect the line
Before anything else, a camera goes through the pipe so we know exactly where the damage is.
Descaling
We clear out roots and corrosion and flush the debris down the line.
Apply the lining
We apply the epoxy to the inside walls, sealing cracks, pinholes and joints.
Camera check
A second camera pass confirms the lining is complete and the line drains well.
Local pipe problems in Burbank
Much of what we find in Burbank is slow drains and pinhole leaks from cast iron that has thinned over 70 years, plus roots in the clay lateral out to the street. Homes up in the Burbank Hills add slope and longer runs to the mix. A camera inspection shows how much of the line can be coated and gives you a firm price before any work starts.


Benefits of epoxy coating in Burbank
Often costs less
Without trenching and surface repairs, the total job is usually smaller.
Quick turnaround
Many jobs are done in a day or two, depending on how much pipe there is.
No digging
Your landscaping and hardscape stay exactly as they are.
Stops corrosion
Sealed joints and walls mean less corrosion and fewer places for roots to get in.
How we price the job
We price by the job, not by the hour. After the camera inspection, you'll know the full cost for your Burbank property before any work starts, and the estimate itself is free.
Free estimate in Burbank. Call 818.468.2385 or 323.918.6108, or send us a request to set up your camera inspection.
Will it work on your line?
Here's the honest version.
Good fit
- Lines under slabs, floors or landscaping
- Clay laterals with root intrusion at the joints
- Small and medium drain lines
- Cast iron with rust and scale
Might need something else
- A line with a deep sag that holds standing water
- Pipe that has collapsed or broken apart
- Very large diameter lines
Warning signs to watch for
Rusty water or flakes
Rust-colored water backing up into a tub or shower suggests corroded cast iron.
Damp spots or stains
Moisture or stains on floors or walls near a drain line can mean a slow leak.
Roots in the line
Roots grow into small gaps at pipe joints. Coating seals those gaps once we clear the roots out.
Repeat clogs
If a line needs snaking over and over, rough or cracked pipe walls are usually catching debris.
Where we work in Burbank
We coat drain lines all over Burbank, including Magnolia Park, the Rancho District, the Burbank Hills and the Media District. We also work in nearby Toluca Lake, Glendale and North Hollywood.
Questions from Burbank homeowners
What kinds of pipe can be coated?
Cast iron, clay and PVC drain lines, which covers most homes in Burbank. The camera inspection tells us whether yours is a good fit.
When can I use my plumbing again?
Most coatings cure in a few hours, so it's often the same day. Bigger systems with several branches can take a day or two.
Is this the same as pipe lining?
Pretty much. You'll also hear it called epoxy pipe lining or pipe relining. All of them mean restoring a pipe by bonding epoxy to the inside.
Do you give free estimates?
Yes. Once we've seen the line on camera, you get a firm price for the whole job before we start.
Does coating stop tree roots?
Roots get into pipes through gaps at the joints. Once we cut them out and seal those gaps with epoxy, they have no easy way back in.
Does the lining reduce the pipe size?
Barely. The epoxy layer is thin, and removing the old buildup usually more than makes up for it.
Want the full story on how it works? Read our main Epoxy Coating for Drain Pipes page.


